Home page Connect to us
Wednesday, October 18, 2017   05:38:53
Resume
Mohammad Kazem Moayyedi, PhD
Assistant Professor of Mechanical Engineering
Aerodynamics and Fluid Mechanics Division


Computational Fluid Dynamics Research Laboratory
Bio-Inspired Aero-Flight Dynamics Research Laboratory
 
(2 Positions are available for graduate international students (M.Sc)  at CFDLab)

Education
B.Sc.,  Mechanical Engineering
M.Sc., Aerospace Engineering (Specially in CFD & Rotor Aerodynamics)
PhD,   Aerospace Engineering (Specially in Computational Fluid Dynamics)


Research Interests

Reduced Order Modeling of Dynamical Systems based on POD and Related Methods
Application of Reduced Order Models in Fluid Mechanics and Heat Transfer Problems
Computational Fluid Dynamics, Aerodynamics, Heat Transfer and Aeroacoustics
Rotor Aerodynamics (Rotorcrafts and Wind Turbines)
Turbulent Flow and Turbulence Modeling
Fluid Flow and Heat Transfer in Porous Media
Environmental Fluid Mechanics (Air Pollution Modeling, Air Cleaning Systems Simulation and etc.)
Fluid Flow Control
Fluid-Structure Interaction

Publications
Peer-Review Journals
Taeibi-Rahni M., Sabetghadam F. and, Moayyedi M. K., “Low-dimensional Proper Orthogonal Decomposition as a Fast Approach of Aerodynamic Data Estimation,” J. Aerospace Engineering, Vol. 23, Issue.1, pp.44-54, January 2010 http://dx.doi.org/10.1061/(ASCE)0893-1321(2010)23:1(44)

Sabetghadam F., Taeibi-Rahni M. and, Moayyedi M. K., “Gappy Low-dimensional POD: A Poweful Tool for Data Reconstruction of Unsteady Flow Fields”, CFD J.,Vol. 17, No.3, pp.156-164, 2008.

M.K.M‌o‌a‌y‌y‌e‌d‌i, M. T‌a‌e‌i‌b‌i-R‌a‌h‌n‌i, F. S‌a‌b‌e‌t‌g‌h‌a‌d‌a‌m “Fast Data Processing and Inverse Aerodynamic Design Using Low dimensional POD Method”, Sharif Journal of Mechanical Eng., 29-3, Issue 1, Winter 2013, Page 3-10 (pdf)

M.K. M‌o‌a‌y‌y‌e‌d‌i, 
F. S‌a‌b‌e‌t‌g‌h‌a‌d‌a‌m and M. T‌a‌e‌i‌b‌i-R‌a‌h‌n‌i, “Calibrated Reduced Order POD Model for Simulation of Unsteady Incompressible Flows”, Aerodynamics and Fluid Mechanics Journal, Vol. 1, No.1, Winter 2012 (pdf)

M.S. Hassanvand, A. Torkian, M.R. Sahebnasagh, K. Nadafi, and M.K. Moayyedi Experimental Investigation of the Effectiveness of Various  Additives in Reducing Wind Erosion from Iron Ore Piles”, Health and Environment Journal, Vol. 5, No.4, 2012 (pdf)

M.K. Moayyedi and M. Najaf-Beygi “Development of a Reduced Order Model for Estimation of the Field of Flow Based on Proper Orthogonal Decomposition Method Using Interpolation and Extrapolation of High Level Energy Modes”, Aerodynamics and Fluid Mechanics Journal, Vol. 5 No.1, 2014, (
pdf)

M.K. Moayyedi
Calibration the Effects of Non-Divergence Free and High Level Energy Modes in POD Reduced Order Model of Incompressible Flows using Adjoint Continuity Equation”, Solid and Fluid Mechanics Journal, Vol. 5 No.4, 2015, 10.22044/DOI: jsfm.2015.680

M.K. Moayyedi
Reconstruction of Gappy Unsteady Flow Fields using Improved Reduced Order POD Model based on Temporal Decomposition Procedure”, AmirKabir Journal of Mechanical Engineering, 2017, Volume 49, Issue 1,
DOI: 10.22060/MEJ.2016.720

M.K. Moayyedi
, E. Jabari, M.M. Hashemi Numerical Simulation of Flow Field and Particles Deposition and Studying the Effects of  Building Architecture on Particles Distribution”, Accepted for Publication in Tabriz University Journal of Mechanical Engineering, 2017.

Moayyedi M. K., “A Surrogate Reduced Order POD Model for Boundary Control and Excitation of Viscous Burger's Equation,” Accepted for Publication in J. Advances and Applications in Fluid Mechanics, 2017.

M.K. Moayye
di Direct Numerical Simulation and Reduced Order Modeling of Mass Transfer Under the Influence of Natural Convection Flow Based on Coupling Between Temperature and Concentration Modes”, Accepted for Publication in Sharif Journal of Mechanical Engineering, 2017, (
link)

Conference Presentations

Taeibi-Rahni M., and Moayyedi M. K., “Rotor Wake Modelling and its Effects on Unsteady Aerodynamic Loads of a Helicopter Rotor in Forward Flight”, ICRAMME 2005, International Conference on Recent Advances in Mechanical & Materials Engineering, Kuala Lumpur, Malaysia.

M. Taeibi-Rahni and M. K.Moayyedi, “Blade Twist Effects on Unsteady Aerodynamics Loads of Unsteady Aerodynamic Loads of a Helicopter Rotor”, 11th International ISME Conference, Ferdowsi University of Mashad, 2003.


M. Taeibi-Rahni, F. Sabetghadam, M.K. Moayyedi and M. Hadidoulabi, “Fast Aerodynamics Data Estimation Model Based on Proper Orthogonal Decomposition Method”, 10th Conference on Fluid Mechanics, Yazd University, 2006.

M. Taeibi-Rahni, F. Sabetghadam, and M.K. Moayyedi, “2D Compressible Flow Estimation Model Development Based on Proper Orthogonal Decomposition Method”, 7th Iranian Aerospace Society Conference, Sharif University of Technology, 2008.

F. Sabetghadam, M. Taeibi-Rahni, and M.K. Moayyedi, “Utilization of Low-dimensional POD Method for Reconstruction of Gappy Data of the Unsteady Flow Fields
”, 1st Special Congress on Unsteady Aerodynamics of Iranian Aerospace Society, Sharif University of Technology, 2008.

M.K. Moayyedi,
M. Taeibi-Rahni, and F. Sabetghadam, “Calibrated Low-dimensional Dynamical Model for Simulation of Unsteady Incompressible Flows”, 12th Conference on Fluid Dynamics, Noshirvani University of Technology, 2009.

F. Sabetghadam, M.K. Moayyedi, and M. Taeibi-Rahni, “A Fast Approach for Transient Calibration of Low-dimensional Dynamical Model of the Unsteady Incompressible Flows”, 9th Iranian Aerospace Society Conference, Science and Research University of Tehran, 2010.

H. Kiani Mavi, M.K. Moayyedi, F. Torabi, “Using an Intelligent, Three-Dimensional Search Algorithm to Exchange Information Between Processing Stages of a Parallel CFD Code”, 9th Conference of Iranian Aerospace Society, Science and Research University of Tehran, 2010.

M.K. Moayyedi, M. Taeibi-Rahni, F. Sabetghdam, “Development of a Low-dimensional POD Method for Reconstructing Gappy Data of the Unsteady Flow Fields using a Time-Advancement Algorithm”, 18th International ISME Conference, Sharif University of Technology, 2010.

M.K.Moayyedi, Taeibi-Rahni M., and Sabetghadam F., “Long Time Extension to Accurate Low-dimensional Dynamical Model Using Combined POD and Fourier Modes”, The 13th Annual and 2nd Intl. Conference on Fluid Dynamics, University of Shiraz, October 2010.

M.K. Moayyedi “Modification of the Reduced Order POD Dynamical Model for Simulation of the Unsteady Incompressible Flows Using Adjoint Continuity Equation”, 10th Conference of Iranian Aerospace Society, Tarbiat Modares University, 2011.

M.K. Moayyedi, M. Taeibi-Rahni, M. Marvi, “Inverse Airfoil Aerodynamic Design Using Proper Orthogonal Decomposition method”, 11th Conference of Iranian Aerospace Society, Shahid Sattari University, 2011.

Moayyedi M. K., and Najafi, M.R., “A Surrogate Low-dimensional POD Approach For Free Vibration Simulation of Linear Beam Model”, The 2nd International Coference on Acoustics and Vibration, Sharif University of Technology, December 2012.

M.K. Moayyedi, M. Marvi, and M. Taeibi-Rahni, “Low-dimensional POD Inverse Aerodynamic Design and Analysis Model”, 12th Conference of Iranian Aerospace Society, Amirkabir University of Technology, 2013.

M.K. Moayyedi, M. Najafbeygi, and M. Hojaji, “Development of a Fast Reduced Order Model For Predicting the Flow Field Using POD Method”, 15th Conference on Fluid Dynamics, Hormozgan University, 2013.

Moayyedi M. K., and Najafibeygi, M., “Flow Field Estimation Due to Several Parameters Variations Based on Combined POD/HOSVD Reduced Order Model”, 13th Conference of Iranaian Aerospace Society, University of Tehran, March 2014.

Moayyedi M. K., Najafi, M.R., and Najafibeygi, M., “A Low-dimensional POD-HOSVD Model for Free Vibration Simulation of Linear Beam under Variations of Several Parameters”, The 4th Conference on Acoustics and Vibration, Iran University of Science and Technology, Tehran, December 2014.

M. Azizi, M.K. Moayyedi, M. Dashti, H. Mahdigholi and A. Torkian, “CFD Simulation of Metal Smelting Furnace Ventilation System”, 4th Annual Conference on Industrial Health and Ventilation, Sharif University of Technology, 2014.

M.K. Moayyedi, and A. Bashardust, “Numerical Simulation of the Flow Field and Motion of Pollutant Particles Around the Raw Materials Piles”, 20th International ISME Conference, Amirkabir University of Technology, 2015.

M.K. Moayyedi “Numerical Simulation of Fluid Flow and Transfer of Pollutants in a Field Under The Influence of Natural Convection”, 6th Conference of CFD Applications in Chemical and Petroleum Industries, Isfahan University of Technology, 2015.

مؤيدي م.ك.، جباري. ا.، و هاشمي، م.م.،شبيه‌سازي عددي ميدان جريان و حركت ذرات آلاينده حول پشته‌هاي انباشت مواد اوليه، اولين كنفرانس ملي محيط‌زيست، انرژي و توسعة پايدار، دانشگاه علم و صنعت ايران، ارديبهشت‌ماه 1394.

M.K. Moayyedi, E. Jabari, M.M. Hashemi, “Numerical Simulation of Fluid Flow and Pollutants Particles Deposition and Studying the Effects of  Building Architecture Change on their Distribution”, 16th Conference on Fluid Dynamics, Razi University, 2015.

M.K. Moayyedi, M. Doroudi, “Numerical Simulation of Flow and Studying the Behavior of Non-Newtonian Fluid Under The Effects of Geometrical Variations”, 16th Conference on Fluid Dynamics, Razi University, 2015.

M.K. Moayyedi, S. AdelNejad, “Numerical Simulation of Compressible Flow Around the Reentry Capsule and Studying the Effects of Insulating Material on Heat Diffusion”, 16th Conference on Fluid Dynamics, Razi University, 2015.


Moayyedi M. K., Kazemi, M., “Reduced Order Framework for Free Vibration Simulation of Linear and Non-linear Beam Model”, The 5th International Conference on Acoustics and Vibration, University of Tehran, December 2015.

 

Moayyedi M. K., “Numerical Simulation of Coupled Mass, Momentum and Heat Transfer in the Field Under Effects of Bouyancy Forces”, The 9th International Chemical Engineering Congressand Exhibition, Shiraz University, December 2015.

M.K. Moayyedi, H. Dehghan, “Numerical Simulation of Secondary Injecting Flow and Investigating the Effects of Jet Angle and Location on Thrust Force Variations”, 21th International ISME Conference, Yazd University, 2016.

M.K. Moayyedi, H. Dehghan, “Numerical Simulation of Thrust Vector Control by Secondary Injection in the Over-Expanded Nozzle and Investigation about the Effective Parameters on Thrust Vector Variations.”, 15th Conference of Iranian Aerospace Society, Civil Aviation College, Tehran, 2016.


M.K. Moayyedi, A. M. Mirzaei, “Numerical Simulation of Flow Around Reentry Capsule and Studying The Effect of Angle of Attack Changes on The Flow Field Structure”, 1st International Conference on Mechanical and Aerospace Engineering, University of Tehran, 2016.

E. Jabari, M.K. Moayyedi, A. M. M. Hashemi, “Three-dimensional Numerical Simulation of Solid Pollutant Particles Flow and Studying the Effect of Building Architecture on Their Distribution”, 9th Annual Conference of Civil Engineering, Ferdowsi University of Mashhad, 2016.


M.K. Moayyedi, “Reduced Order Modeling of Mass, Momentum and Heat Transfer in the Field Under Effects of Natural Convection”, 7th Conference on CFD Applications in Chemical and Petroleum Industries, Shahid Bahonar University of Kerman, 2016.

M.K. Moayyedi, “Numerical Simulation of Natural Convection and Studying the Effects of Schmidt Number Variations on Mass Diffusion and Convection”, 8th Conference on CFD Applications in Chemical and Petroleum Industries, Tarbiat Modaress University, 2017.

M.K. Moayyedi, A. Ghaedi, “Flow Control Around a 2D Wing and Its Effects on Aerodynamics Performance Using Blowing and Suction Flow Strategies”, 22th International ISME Conference, Tarbiat Modaress University, 2017.

M.K. Moayyedi, M. H. Ebrahimi, “Computational Modeling of Turbulent Flow Around a Low Power Wind Turbine and Investigation about the Effects of Freestream Velocity Variations on Blade Loading”, 2nd International Conference on Mechanical and Aerospace Engineering, Kharazmi University, 2017.


Job Experiences
Assistant Professor of Mechanical Engineering, Department of Mechanical Eng., University of Qom
Educational & Research Deputy Director of School of Engineering, September 2014-2017
Head of Mechanical Engineering Department, 2011-2014

Head of Thermal-Fluid, Aerospace Eng. Committe, Department of Mechanical Engineering, July 2014-Now


Professional Affiliations

Iranian Society of Mechanical Engineers (
ISME)
Iranian Aerospace Society (IAS)
Iranian Society of Solar Energy
Iranian Society of Aerospace Propulsion
Physical Society of Iran
American Helicopter Society
(AHS)

Teaching Experiences

Undergraduate Courses

Fluid Mechanics I
Fluid Mechanics II
Gas Dynamics

Aerodynamics

Numerical Computations
Introduction to CFD

Graduate Courses
Advanced Fluid Mechanics
Advanced Engineering Mathematics



Graduate Students
M. Marvi, Department of Aerospace Engineering, Sharif University of Technology, 2013 (Graduated ), With Collaboration Prof. Taeibi-Rahni
M. Najafbeygi, Department of Aerospace Engineering, University of Tehran, 2012-2013(Graduated), With Collaboration Dr. Sabur
M. Hashemi, Department of Civil Engineering, University of Qom, 2015 (Graduated), With Collaboration Dr. Jabari
A. Ghaedi, Department of Mechanical Engineering, Azad University of NajafAbad, 2017 (Graduated)
A. Ahmadi, Department of Civil Engineering, University of Qom, 2016 (Graduated), With Collaboration Dr. Taher Rajaei
F. Zahedi, Department of Civil Engineering, University of Qom, 2017 (Graduated), With Collaboration Dr. Ehsan Jabari
F. Sefat, Department of Civil Engineering, University of Qom, 2017 (In Progress), With Collaboration Dr. Ehsan Jabari
A. Bashardust, Department of Mechanical Engineering, Science and Research University of Tehran, 2017 (In Progress), With Collaboration Dr. Nobakhti
Mr. Sabaghzadeghan, Department of Mechanical Engineering, University of Qom, 2017 (In Progress)

Personal Information
Contant Information
Assistant Professor of
Mechanical Engineering
 School of Engineering, No. 15 Building
University of Qom,
Qadir Blvd, Qom, Iran
Phone : 0098-25-3210-3532

 

HomePage  | SiteMap | Contact to us

Copyright  © 2010 Qom.ac.ir All rights reserved
Home | Back |
Guest (qomuniguest)

دكتر محمد كاظم مؤيدي - عضو هيأت علمي گروه مهندسي مكانيك دانشكده فني و مهندسي دانشگاه قم
Powered By : Sigma ITID